[Previous][Next]
System Description
 
 
SYSTEM DIAGRAM
 
 
DESCRIPTION
  • The combination meter receives signals necessary for controlling the operation of the information display from each unit, sensor and switch.
  • The combination meter incorporates a trip computer that displays the warning/information according to the information received from each unit, sensor and switch.
  • The combination meter shows the following functions on the information display.
    • Warning/Indicator
    • Odometer
    • Distance to empty
    • Warning confirmation
    • Setting
    • Trip computer
    • Ambient temperature
    • Clock
    • Meter illumination level
  • The items that displayed to information display can be selected by the steering switch and illumination control switch. For further details, Refer to Switch Name and Function.
 
 
WARNING/INDICATOR LIST
WARNING
WarningReference
Headlight warningRefer to Headlight WarningHeadlamp Warning.
Light reminder warningRefer to Light Reminder Warning (Information Display).
AWD warningRefer to AWD Warning.
Door open warningRefer to Door Open Warning.
Keyless operation key low battery warningRefer to Keyless operation key Low Battery WarningIntelligent Key Low Battery Warning.
Keyless operation key system malfunctionRefer to Keyless operation key System MalfunctionIntelligent Key System Malfunction.
Take away warningRefer to Take Away Warning (Information Display)Take Away Warning.
Parking sensor errorRefer to Parking Sensor Error.
AEB system displayRefer to Operation.
RAB system displayRefer to Operation.
MI-PILOT Assist system displayRefer to Warning/Indicator (On Information Display).
PFCW system displayRefer to OperationMenu Displayed by Pressing Each Switch.
LDW system displayRefer to OperationMenu Displayed by Pressing Each Switch.
LDP system displayRefer to OperationMenu Displayed by Pressing Each Switch.
BSW system displayRefer to OperationMenu Displayed by Pressing Each Switch.
BLIND SPOT INTERVENTION system displayRefer to OperationMenu Displayed by Pressing Each Switch.
RCTA system displayRefer to OperationMenu Displayed by Pressing Each Switch.
TSR system displayRefer to OperationSwitch Name and Function.
DAA system displayRefer to OperationSwitch Name and Function.
Chassis control warningRefer to Chassis control warningChassis Control Warning.
Parking brake warningRefer to Parking Brake Warning.
Automatic brake hold warningRefer to Automatic Brake Hold Warning.
Low tire pressure warningRefer to Low Tire Pressure Warning.
Electric shift warningRefer to Electric Shift Warning.
Shift P warningRefer to Shift P Warning.
Engine warningRefer to Indicator/InformationWarning/Indicator (On Information Display).
CVT system warningRefer to CVT System Warning.
INDICATOR
IndicatorReference
Remote engine start informationRefer to Remote Engine Start Information.
Low fuel warningRefer to Low fuel warning.
AWD torque distribution indicatorRefer to AWD Torque Distribution Indicator.
Engine start informationRefer to Engine Start Information.
Key ID verification informationRefer to Key ID Verification Information.
Audio indicatorRefer to Meter Display Function.
Hands-free phone indicatorRefer to Meter Display Function.
Sonar indicatorRefer to Sonar Indicator.
Driving position memoryRefer to Driving Position Memory.
AEB system displayRefer to Operation.
RAB system displayRefer to Operation.
MI-PILOT Assist system displayRefer to Warning/Indicator (On Information Display).
PFCW system displayRefer to OperationMenu Displayed by Pressing Each Switch.
LDW system displayRefer to OperationMenu Displayed by Pressing Each Switch.
LDP system displayRefer to OperationMenu Displayed by Pressing Each Switch.
BSW system displayRefer to OperationMenu Displayed by Pressing Each Switch.
BLIND SPOT INTERVENTION system displayRefer to OperationMenu Displayed by Pressing Each Switch.
RCTA system displayRefer to OperationMenu Displayed by Pressing Each Switch.
TSR system displayRefer to OperationSwitch Name and Function.
DAA system displayRefer to OperationSwitch Name and Function.
Tire pressure displayRefer to Tire Pressure Display.
Drive mode indicatorRefer to Drive Mode Indicator.
ASCD indicatorRefer to Indicator/InformationWarning/Indicator (On Information Display).
Oil control system (OCS) indicatorRefer to Indicator/InformationWarning/Indicator (On Information Display).
Shift position indicatorRefer to Shift Position Indicator.
Neutral hold mode indicatorRefer to Neutral Hold Mode Indicator.
AlertRefer to Alert.
MaintenanceRefer to Maintenance.
Low outside temperature displayRefer to Low outside temperature display.
 
 
ODOMETER
The combination meter calculates mileage, based on the following signals and displays the mileage on the information display.
Signal nameSignal path
Ignition signal
Odometer signalABS actuator and electric unit (control unit) Combination meter
 
 
Indication Range
Odometer0 km - 999999 km
 
 
DISTANCE TO EMPTY
The combination meter calculates distance to empty based on the following signals, and the calculated value is displayed on the information display.
Signal nameSignal source
Ignition signal
Fuel level sensor signalFuel level sensor unit Combination meter
Fuel consumption monitor signalECM Combination meter
Vehicle speed display signalECM Combination meter
note
  • Distance to empty on the information display is updated approximately every 30 seconds.
  • When the ignition switch is turned ON right after battery removal and installation, “−−−” is displayed until after a travel of 30 seconds.
  • The indicated values may not match each other when refueling with the ignition switch ON.
 
 
WARNING CONFIRMATION
  • The combination meter can cause an interrupt on the information display to indicate a warning, based on signals received from each unit and switch.
  • The indicated warning can be checked with “WARNING” during the satisfaction of an interrupt indication condition for each warning.
 
 
SETTINGS
The condition of following items can be set.
  • ASC Setting
  • Driver Assistance
  • ECO Mode Setting
  • TPMS Setting
  • Clock
  • Vehicle Settings
  • Maintenance
  • Customize Display
  • Unit/Language
  • Key-Linked Settings
  • Factory Reset
 
 
TRIP COMPUTER
 
 
Current Fuel Consumption
The combination meter calculates current fuel consumption based on the following signals, and the calculated value is displayed on the information display.
Current fuel consumption can be compared with average fuel consumption.
Signal nameSignal source
Ignition signal
Fuel consumption monitor signalECM Combination meter
Vehicle speed display signalECM Combination meter
note
  • Current fuel consumption on the information display is updated approximately every 0.1 seconds.
  • Current fuel consumption on the information display shows 30 l/100km (0 mpg) when vehicle speed is 0 km/h (0 MPH).
 
 
Average Fuel Consumption
The combination meter calculates average fuel consumption based on the following signals, and the calculated value is displayed on the information display.
Signal nameSignal source
Ignition signal
Fuel consumption monitor signalECM Combination meter
Vehicle speed display signalECM Combination meter
note
  • Average fuel consumption on the information display is updated approximately every 30 seconds.
  • Soon after a reset or when the ignition switch is turned ON, “−−−” is displayed until after a travel of 30 seconds and approximately 500 m (0.31 mile).
 
 
Current Vehicle Speed
The combination meter calculates current vehicle speed based on the following signals, and the calculated value is displayed on the information display.
Signal nameSignal path
Ignition signal
Vehicle speed display signalECM Combination meter
noteCurrent vehicle speed on the information display is updated approximately every 0.3 seconds.
 
 
Average Vehicle Speed
The combination meter calculates average vehicle speed based on the following signals, and the calculated value is displayed on the information display.
Signal nameSignal source
Ignition signal
Vehicle speed display signalECM Combination meter
note
  • Average vehicle speed on the information display is updated approximately every 30 seconds.
  • Soon after a reset, “−−−” is displayed until after 30 seconds.
 
 
Travel Time
The combination meter measures and displays travel time (ignition switch ON time).
 
 
Travel Distance
The combination meter measures and displays travel distance.
 
 
ECO Pedal Guide
The ECO pedal guide consists of Gauge 1 (displays accelerator pedal angle) and Gauge 2 (displays the guideline of ECO driving).
GAUGE1
  • ECM corrects the accelerator pedal angle to the maximum angle for ECO driving, according to vehicle speeds.
    The maximum accelerator pedal angle increases/decreases as the vehicle speed increases/decrease.
    The maximum accelerator angle corrected by ECM is the limitation of ECO driving. The ECO driving is possible only when the number of unlit segments of the indicator bar is equal to or less than that of Gauge 2.
    The less the number of unlit segments of the indicator bar, the more the degree of ECO driving is. And the more the number of unlit segments, the less the degree of ECO driving is.
    ECM judges the number of lighting segments according to the accelerator pedal angle and vehicle speed and transmits a CAN communication signal to the combination meter via CAN communication.
    The combination meter indicates the number of segments necessary for the ECO pedal guide, according to an ECO pedal guide signal.
    noteThe combination meter corrects the number of lighting segments according to a vehicle speed signal.
GAUGE2
  • The combination meter turns ON/OFF the Gauge 2 (guide line for ECO driving) according to a vehicle speed signal.
ECO DRIVE INDICATOR
  • The combination meter displays level of ECO drive in conjunction with ECO pedal guide.
Signal nameSignal path
Ignition signal
ECO pedal guide signalECM Combination meter
 
 
ECO Drive Report
  • The ECO drive report is a function which displays the last five data of average fuel consumption, present fuel economy (present value), and the best fuel economy (highest value) on the information display by calculating and recording average fuel consumption.
  • The combination meter calculates the average fuel consumption according to the signal below, detects the status of ECO mode , and displays “ECO drive report” on the information display when the ignition switch is turned ON→OFF.
    Signal nameSignal path
    Ignition signal
    Fuel consumption monitor signalECM Combination meter
    Vehicle speed display signalECM Combination meter
    ECO mode indicator signalECM Combination meter
 
 
AMBIENT TEMPERATURE
The combination meter calculates ambient temperature based on the following signals, and the calculated value is displayed on the information display.
Signal nameSignal path
Ignition signal
Ambient sensor signalAmbient sensor Combination meter
Vehicle speed display signalECM Combination meter
note
  • The indicated temperature is corrected based on an ignition signal, ambient temperature detected by the ambient sensor, and vehicle speed signal. The indicated temperature is not raised under vehicle speed less than 20 km/h (12 MPH).
  • The ambient sensor input value that is displayed on “Data List” of M.U.T.-III SE is the value before the correction. It may not match the indicated temperature on the information display.
  • Depending on engine heat or heat on the road surfaces, an ambient temperature may be indicated higher than actual one.
 
 
CLOCK
The combination meter calculates time and displays it on the information display.
noteThe settings screen of the information display allows the selection of time indication between 12-hour and 24-hour formats.
 
 
METER ILLUMINATION LEVEL
The combination meter displays the illuminance level of the back light on the information display by turning the illumination control switch.