[Previous][Next]
Parking Brake Warning
 
 
DESIGN/PURPOSE
  • Warns the driver of the necessity of depressing the brake pedal.
  • Warns the driver of the necessity of releasing the parking brake.
 
 
Warning Message
DesignWarning Message
Press brake pedal
Release parking brake
 
 
SYNCHRONIZATION WITH MASTER WARNING LIGHT
Applicable
 
 
SYNCHRONIZATION WITH WARNING CHIME
Applicable
 
 
SYSTEM DIAGRAM
 
 
SIGNAL PATH
The ABS actuator and electric unit (control unit) transmits a signal to the combination meter via CAN communication under the conditions bellow:
  • When necessary to depress the brake pedal.
  • When necessary to release the parking brake.
 
 
WARNING/INDICATOR OPERATING CONDITION
When the following conditions are satisfied (ignition switch ON)
  • The parking brake switch is pushed without depressing the brake pedal.
  • The parking brake is operated with the parking brake switch kept pulled during driving.
  • The parking brake braking force is insufficient (vehicle is moving backward).
  • When the vehicle is moving.