[Previous][Next]
Menu Displayed by Pressing Each Switch
 
 
Switch Name and Function
No.Switch nameDescription
Steering switch
  1. In the [Settings] menu, select the [Driver Assistance] key
  2. Select the [Blind Spot] submenu
  3. A tick mark next to [Blind Spot Warning] indicates that the system is turned ON
  4. Press [OK] to turn the system OFF or ON
 
 
SYSTEM DISPLAY
No.Switch nameDescription
BSW system indicatorIndicates that BSW system is ON
BSW indicator
  • Blinks when BSW system is warning to driver
  • Indicates that an abnormal condition is present in BSW system
BSW indicator LH/RH
  • Illuminates when detect other vehicles beside vehicle in an adjacent lane
  • Blinks when BSW system is warning to driver
 
 
DISPLAY AND WARNING
 
 
System Display
ConditionActionIndication on the BSW indicatorDisplay on information displayBuzzer
BSW OFFOFF
OFF
BSW ONVehicle speed is less than approx. 29 km/h (18 MPH)OFFBSW system indicator : White
Speaker icon : White
OFF
Vehicle speed is approx. 32 km/h (20 MPH) or moreVehicle is not detectedOFFBSW system indicator : White
Speaker icon : White
OFF
Vehicle is detectedTurn signal is OFFONBSW system indicator : White
Speaker icon : White
OFF
Vehicle is detected before turn signal operatesTurn signal is ON (vehicle detected direction)BlinkYellow (Blink)
Short continuous beeps
BSW system indicator : Yellow (Blink)
Speaker icon : White
Vehicle is detected after turn signal operatesTurn signal is ON (vehicle detected direction)BlinkYellow (Blink)
OFF
BSW system indicator : Yellow (Blink)
Speaker icon : White
BSW is malfunctionThe BSW system is automatically canceled.
noteThe system operates if the ignition switch is turned OFF → ON after the condition improves
OFFYellow
OFF
Not Available
System Malfunction
Dirt around the side radarThe BSW system is automatically canceled.
noteThe system operates if the ignition switch is turned OFF → ON after the condition improves
OFFUnavailable
Side Radar
Obstruction
OFF
note
  • If vehicle speed exceeds approximately 32 km/h (20 MPH), BSW function operates until the vehicle speed becomes lower than approximately 29 km/h (18 MPH).
  • Time shown in the figure is approximate time.