[Previous][Next]
Shift P Warning
 
 
DESIGN/PURPOSE
Shift P warning warns that the driver is getting off the vehicle with the shift position not in P position.
SymbolMessage
Shift to P Range
 
 
SYNCHRONIZATION WITH MASTER WARNING LIGHT
Applicable
 
 
SYNCHRONIZATION WITH WARNING (Buzzer)
Applicable
For warning chime, refer to Shift P Warning (Buzzer).
 
 
OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIGNAL
For actions on CAN communications blackout in the combination meter, refer to Fail-Safe.
 
 
SYSTEM DIAGRAM
 
 
SIGNAL PATH
  • TCM judges the shift position by the transmission range switch.
  • BCM transmits a door switch signal to the TCM.
  • The TCM judges the vehicle condition according to the shift position signal and the door switch signal. The TCM transmits a shift P range request display signal to the combination meter if the driver's door is opened with the shift position not in P position.
 
 
WARNING/INDICATOR OPERATING CONDITION
When all of the following conditions are satisfied:
  • Shift position: Except P position
  • Front door (driver side): Open
 
 
WARNING/INDICATOR CANCEL CONDITION
When any of the following conditions are satisfied:
  • Shift position: P position
  • Front door (driver side): Close
 
 
TIMING CHART