[Previous][Next]
Menu Displayed by Pressing Each Switch
 
 
Switch Name and Function
No.Switch nameDescription
Steering switch
  1. In the [Settings] menu, select the [Driver Assistance] key
  2. Select the [Blind Spot] submenu
  3. A tick mark next to [Active Blind Spot Assist [ABSA]] indicates that the system is turned ON
  4. Push the Drive Assist switch
 
 
SYSTEM DISPLAY
No.Switch nameDescription
Active Blind Spot Assist [ABSA] indicatorIndicates that Active Blind Spot Assist [ABSA] is ON
Active Blind Spot Assist [ABSA] indicator
  • Blinks when Active Blind Spot Assist [ABSA] is warning to driver
  • Indicates that an abnormal condition is present in Active Blind Spot Assist [ABSA]
Active Blind Spot Assist [ABSA] ON indicatorIndicate that Active Blind Spot Assist [ABSA] is ON
Blind Spot Warning/Active Blind Spot Assist [ABSA] indicator LH/RHIlluminates when detect other vehicles beside vehicle in an adjacent lane
 
 
DISPLAY AND WARNING
 
 
System Display
ConditionActionIndication on the BSW indicatorDisplay on information displayBuzzer
Active Blind Spot Assist [ABSA] OFFOFF
OFF
Active Blind Spot Assist [ABSA] ONVehicle speed is less than approx. 60 km/h (37 MPH)OFFWhite
OFF
Active Blind Spot Assist [ABSA] indicator : White
Dynamic driver assistance icon : White
Vehicle speed is approx. 60 km/h (37 MPH) or moreVehicle is not detectedOFFWhite
OFF
Active Blind Spot Assist [ABSA] indicator : White
Dynamic driver assistance icon : White
Vehicle is detectedVehicle does not approach to adjacent laneONWhite
OFF
Active Blind Spot Assist [ABSA] indicator : White
Dynamic driver assistance icon : White
Vehicle approaches to adjacent laneYawing control is ONONYellow (Blink)
ON
Active Blind Spot Assist [ABSA] indicator : Yellow (Blink)
Dynamic driver assistance icon : White
Active Blind Spot Assist [ABSA] is malfunctionThe Active Blind Spot Assist [ABSA] is automatically canceled.OFFYellow
ON
Not Available
System Malfunction
When the ASC or ABS (including the TCS) operatesThe Active Blind Spot Assist [ABSA] is automatically canceled.
noteThe system operates if the dynamic driver assistance switch is turned OFF → ON after the condition improves
OFFNot Available
Poor Road Conditions
ON
  • When the ASC is turned OFF
  • When the SNOW mode or OFF-ROAD mode is selected (AWD models)
The Active Blind Spot Assist [ABSA] is automatically canceled.
noteThe system operates if the dynamic driver assistance switch is turned OFF → ON after the condition improves
OFFCurrently not availableON
Front camera unit high temperatureThe Active Blind Spot Assist [ABSA] is automatically canceled.
noteThe system operates if the dynamic driver assistance switch is turned OFF → ON after the condition improves
OFFUnavailable
High Cabin
Temperature
ON
Dirt around the side radarThe Active Blind Spot Assist [ABSA] is automatically canceled.
noteThe system operates if the dynamic driver assistance switch is turned OFF → ON after the condition improves
OFFUnavailable
Side Radar
Obstruction
ON
note
  • If vehicle speed exceeds approximately 32 km/h (20 MPH), BSW function operates until the vehicle speed becomes lower than approximately 29 km/h (18 MPH).
  • Time shown in the figure is approximate time.
  • Always Active Blind Spot Assist [ABSA] operates together with BSW system. Whenever Active Blind Spot Assist [ABSA] is turned ON by pushing the dynamic driver assistance switch, BSW system also be turned on even if the BSW system is turned off.