When the driver is exiting the vehicle while engine status is other than running and lamps are ON, the light reminder warning (information display) displays a warning in the information display to alert the driver.
OPERATION AT COMBINATION METER CAN COMMUNICATION CUT-OFF OR UNUSUAL SIGNAL
For actions on CAN communications blackout in the combination meter. Refer to Fail-Safe (Full TFT meter) or Fail-Safe (7 inch information display).
SYSTEM DIAGRAM
SIGNAL PATH
BCM reads status of combination switch.
BCM detects vehicle condition depending on the engine status signal (received from ECM via CAN communication).
BCM judges light reminder warning (information display) by lighting switch signal, front door switch (driver side) signal and engine status signal. BCM transmits light reminder warning signal to combination meter via CAN communication.
When combination meter receives the light reminder warning signal, light reminder warning pop-up screen appears in the information display.
WARNING/INDICATOR OPERATING CONDITION
When all of the following conditions are satisfied.
Engine status is other than running
Lighting switch 1ST or 2ND
Front door (driver side) OPEN [front door switch (driver side) ON]
WARNING/INDICATOR CANCEL CONDITION
When any of the following conditions are satisfied.
Engine status is running
Lighting switch other than 1ST or 2ND
Front door (driver side) CLOSE [front door switch (driver side) OFF]
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)
.)
)