[Previous][Next]
TROUBLE SYMPTOM CHART
 
 
cautionDuring diagnosis, a diagnostic trouble code associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.
Trouble symptomInspection procedure numberReference page
Power supply circuit system abnormality of power liftgate control unit.A-1
Power liftgate automatic operation and easy closer system do not work normally.A-2
The power liftgate automatic operation does not work normally (both the open operation and close operation do not work).A-3
Power liftgate automatic operation (close) does not work normally.A-4
Power liftgate automatic operation (open) does not work normally.A-5
Power liftgate automatic operation does not work normally by the operation of power liftgate close switch (only the close of automatic operation).A-6
Power liftgate automatic operation does not work normally by the operation of keyless operation key (for both open and close operations).A-7
Power liftgate automatic operation does not work normally by the operation of liftgate lock release handle (only the open of automatic operation).A-8
Power liftgate automatic operation does not work normally by the operation of power liftgate switch (for both open and close operations).A-9
Easy closer system and power liftgate automatic operation (open) work with the door locked.A-10
Hazard warning lights do not flash when power liftgate works automatically.A-11
Alarm does not sound normally when power liftgate works automatically.A-11
Power liftgate becomes as door-ajar.A-12