TCM cannot communicate with scan tool (M.U.T.-III) | 1 | |
The vehicle does not run at any range (including low power). | 2 | |
The vehicle does not run at the "D" or the "R" range. | 3 | |
The acceleration is poor. | 4 | |
The vehicle moves at the "N" range. | 5 | |
Gears cannot be shifted at all, or a certain gear shift (1st to 2nd, 2nd to 3rd, etc.) is not made. | 6 | |
The torque converter is not locked up. | 7 | |
The clutch slips when the vehicle starts or during gear shift. | 8 | |
The engine brake is not applied. | 9 | |
The shift shock is large at a certain gear shift. (1st to 2nd, 2nd to 3rd, etc.) | 10 | |
The select shock is large when the selector lever position is shifted from "N" to "D", and "N" to "R." | 11 | |
Abnormal sound occurs during idling. | 12 | |
Abnormal sound occurs during driving. | 13 | |
Abnormal sound occurs during gear shift. | 14 | |
Engine stall | 15 | |
Oil leaks from the air breather. | 16 | |
The starter does not rotate at the "P" or "N" range. (The engine does not start.) | 17 | |