[Previous][Next]
Inspection Procedure 15: Engine stall
 
 
 
 
PROBABLE CAUSES
  • Engine system failure
  • Malfunction of the transmission fluid
  • Malfunction of the torque converter
  • A/T failure: Hydraulic system (valve body assembly), driving force transaxle system (clutch/brake)
 
 
DIAGNOSIS
STEP 1. Check the engine performance.
Is the check result normal?
Go to Step 2.
Repair the failure, and perform adjustment.
 
STEP 2. Check the transmission fluid.
Check the transmission fluid for burning, fouling, and foreign material.
Is the check result normal?
Go to Step 3.
Go to Step 6.
 
STEP 3. Check the transmission fluid level.
Check if the transmission fluid level is adequate.
Is the check result normal?
Go to Step 4.
Check and repair the leakage point of the transmission fluid, add the transmission fluid, and then go to Step 4.
 
STEP 4. Perform a hydraulic test.
Refer to .
Is the check result normal?
Go to Step 5.
Go to Step 6.
 
STEP 5. Compare with another same model vehicle.
Is there a difference from the same model vehicle?
Go to Step 6.
The procedure is complete.
 
STEP 6. Retest the system.
Does the engine stall occur again?
Is the check result normal?
Replace the transaxle assembly.
The procedure is complete.