Inspection Procedure 16: Oil leaks from the air breather.
PROBABLE CAUSES
Poor adjustment of the transmission fluid level
A/T failure: Driving force transaxle system
DIAGNOSIS
STEP 1. Check the transmission fluid.
Check the transmission fluid for burning, fouling, and foreign material.
Is the check result normal?
Go to Step 2
.
Replace the transaxle assembly.
STEP 2. Check the transmission fluid level.
Check if the transmission fluid level is adequate.
Is the check result normal?
Go to Step 3
.
Check and repair the leakage point of the transmission fluid, add the transmission fluid, and then go to Step 3
.
STEP 3. Perform a hydraulic test.
Refer to
.
Is the check result normal?
The procedure is complete.
Replace the transaxle assembly.