[Previous][Next]
DTC U0101: T/M CAN Timeout
 
 
caution
  • If there is any problem in the CAN bus lines, an incorrect diagnostic trouble code may be set. Prior to this diagnosis, diagnose the CAN bus lines.
  • Whenever the ECU is replaced, ensure that the CAN bus lines are normal.
 
 
OPERATION
ACC-ECU communicates with the TCM via the CAN bus lines.
 
 
DIAGNOSTIC TROUBLE CODE SET CONDITION
This diagnostic trouble code is set when the abnormality below is detected:
  • The signal sent from the TCM cannot be received for a certain period.
 
 
PROBABLE CAUSES
  • Malfunction of the CAN bus line
  • Malfunction of TCM
  • Malfunction of ACC-ECU

 
 
DIAGNOSIS
STEP 1. Diagnose the CAN bus line.
(1)
cautionTo prevent damage to scan tool (M.U.T.-III), always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool (M.U.T.-III).
Connect scan tool (M.U.T.-III). Refer to "How to connect the Scan Tool (M.U.T.-III) ."
(2) Turn the ignition switch to the "ON" position.
(3) Diagnose the CAN bus line. (Refer to GROUP 54C - Explanation About The Scan Tool (M.U.T.-III) Can Bus Diagnostics )
(4) Turn the ignition switch to the "LOCK" (OFF) position.
Is the check result normal?
Go to Step 2.
Repair the CAN bus lines (Refer to GROUP 54C - Diagnosis, Can Bus Diagnostics Table ).
 
STEP 2. Scan tool (M.U.T.-III) other system diagnostic trouble code.
Check the CVT diagnostic trouble code (Refer to GROUP 23A - Diagnosis, Diagnostic Trouble Code Chart ) or the A/T diagnostic trouble code (Refer to GROUP 23C - Diagnosis, Diagnostic Trouble Code Chart ).
Is the diagnostic trouble code set?
Perform the relevant troubleshooting.
Go to Step 3.
 
STEP 3. Scan tool (M.U.T.-III) other system diagnostic trouble code.
Check if diagnostic trouble code No. U0101 is set in other ECU.
Is the diagnostic trouble code set?
Replace the TCM (Refer to GROUP 23A - TCM <CVT> or GROUP 23C - TCM <A/T>).
Go to Step 4.
 
STEP 4. Check whether the diagnostic trouble code is set again.
Is diagnostic trouble code No.U0101 set?
Replace the ACC-ECU (Refer to ).
Intermittent malfunction (Refer to GROUP 00 - How to Cope with Intermittent Malfunction ).