[Previous][Next]
TROUBLE SYMPTOM CHART
caution
  • During diagnosis, a DTC associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for DTC(s). If DTC(s) are set, erase them all.
  • If the combination meter needs to be replaced as a result of troubleshooting, the current driving distance and elapsed days must be entered into the meter after the replacement in order to be used for service reminder function. Therefore, read "Integrated mileage for reminder," "Integrated days for reminder," "Mileage until Extra reminder," "Months until Extra reminder," and "Current schedule" from the meter before the replacement using the special function of scan tool (M.U.T.-IIISE), and note them. For the operation method of scan tool (M.U.T.-IIISE), refer to . If "Integrated mileage for reminder" or "Integrated days for reminder" cannot be read from the meter using scan tool (M.U.T.-IIISE), use the following method.
    1. As for the driving distance for check warning, use the driving distance displayed on the multi information display.
    2. As for the elapsed days for check warning, calculate the number of elapsed days from the delivery date to the customer (service reminder function start date) and current date.
Trouble symptomInspection Procedure No.Reference page
Power supply circuit check1
The odometer and the trip meter are not displayed.2
No needle meters work.3
If the ignition switch is turned to the ON position, the indicator and warning lights do not illuminate normally.4
The speedometer does not work (the other meters work).5
The tachometer does not work (the other meters work).6
Tone alarms do not sound normally.7
Fuel gauge does not work (the other meters work).8
The combination meter light does not illuminate normally or the multi-information display is not displayed normally.9
The multi-information display screen cannot be changed with the operation of the meter information switch.10
Parking brake reminder tone alarm does not sound.11
Brake warning light does not illuminate.12
Front seat belt reminder function does not work normally (driver’s side).13
Front seat belt reminder function does not work normally (passenger’s side).Refer to GROUP 52A, Front Seat Belt
The combination meter and instrument panel illumination does not illuminate normally.14