STEP 1. Using scan tool (M.U.T.-IIISE), check whether the DTC is set.
Check if DTC B1201 is set.(1) caution | To prevent damage to scan tool (M.U.T.-IIISE), always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool (M.U.T.-IIISE). |
Connect scan tool (M.U.T.-IIISE). Refer to "How to connect the Scan Tool (M.U.T.-IIISE)
."
(2) Turn the ignition switch to the "ON" position.
(3) Check the DTC.
Is DTC B1201 set?
Perform the troubleshooting of when the DTC is set (Refer to ). Go to Step 2.
STEP 2. Fuel pump and gauge unit (main) and fuel gauge unit (sub) <AWD> check
STEP 3. Using scan tool (M.U.T.-IIISE), check data list.
STEP 4. Using scan tool (M.U.T.-IIISE), check actuator test.
STEP 5. Retest the system.