[Previous][Next]
Inspection Procedure 10: The multi-information display screen cannot be changed with the operation of the multi-information display switch.
cautionBefore replacing the combination meter, be sure to check that the power supply circuit, ground circuit, and communication circuit are normal.
 
 
 
 
TECHNICAL DESCRIPTION (COMMENT)
When the signal from the multi-information display switch is received, the combination meter switches the multi-information display screen. If the multi-information display screen does not switch normally, the multi-information display switch, wiring harness, connector(s), or combination meter may have a problem.
 
 
TROUBLESHOOTING HINTS
  • Malfunction of multi-information display switch
  • The combination meter may be defective
  • Damaged harness wires and connectors
 
 
DIAGNOSIS
1. Using scan tool (M.U.T.-IIISE), check whether the DTC B2464 is set.
2. Using scan tool (M.U.T.-IIISE), select "Test" from the special function of the combination meter [Item 3: LCD (AUTO)].
3. Retest the system.