| Cannot communicate with KOS&OSS-ECU using the scan tool | 1 |  |
| The keyless operation key cannot be registered using the scan tool | 2 | |
| Abnormality in KOS&OSS-ECU power supply and ground circuits | 3 | |
| Keyless operation warning display does not disappear | 4 | |
| No door will be locked or unlocked by operating a lock/unlock switch on any door | 5 | |
| Driver's door lock/unlock switch does not work | 6 | |
| Trunk lid opener switch does not work | 7 | |
| Keyless entry function does not work | 8 | |
| KOS timer lock function does not work | 9 | |
| Keyless entry hazard answer back function or the dome light answer back function does not work normally | 10 | |
| Outer tone alarm does not sound | 11 | |
| Power door locks with selective unlocking does not work | 12 | |
| Vehicle power does not turn "ON" (not possible with both of power supply mode "ACC" and "ON") | 13 | |
| Engine does not start (cranking is not performed) | 14 | |
| Vehicle power cannot be turned "OFF" when the shift position is in "P" (Power supply mode "ON" to "ACC" is possible) | 15 | |
| ACC power auto cut function does not work normally | 16 | |
| Vehicle power cannot be turned "OFF" | 17 | |
| The TPMS warning light stays on | - | Refer to GROUP 31, Trouble Symptom Chart . |
| The TPMS warning light flash for about 1 minute and then remain illuminated | - |
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)