Scan tool communication with ABS/TCL/Skid control system is impossible. | Scan tool communication with all systems are impossible. | - | Refer to GROUP 54C - Troubleshooting . |
Scan tool communication only with ABS/TCL/Skid control system is impossible. | 1 | |
ASC OFF indicator light flashes at a rate of 2Hz. | 2 | |
Brake warning light stays ON with the parking brake lever released. | 3 | |
ABS warning light does not illuminate when ignition switch is turned to the ON position (Engine stopped). | 4 | |
Brake warning light does not illuminate when the ignition switch is turned to ON position (Engine stopped). | 5 | |
ABS warning light stays ON after the engine is started. | 6 | |
ASC warning display stays ON after the engine is started. | 7 | |
ASC OFF display or ASC OFF light stays ON after the engine is started. | 8 | |
ASC Operation Display Stays ON after the Engine is Started. | 9 | |
After ASC OFF switch is turned OFF, TCL/Skid control system cannot be disabled. | 10 | |
Abnormality in brake operation | 11 | |
ASC system does not operate or faulty ASC operate. | 12 | |
ASC-ECU power supply circuit system | 13 | |
Steering wheel sensor power supply circuit system | 14 | |
HSA (Hill Start Assist) does not work. | 15 | |
HSA (Hill Start Assist) works on a flat road. | 16 | |
The initial check sound of hydraulic unit is loud. | 17 | |