DIAGNOSTIC TROUBLE CODE (DTC) NO.

DIAGNOSTIC ITEMS

CHECK ITEMS (REMEDY)

MEMORY

REF- ERENCE PAGE

P0101 P0102

Volume Air Flow Circuit Malfunction

•Harness and connector (If harness and connector are normal, replace volume air flow sensor assembly.)

Retained

P0106 P0107 P0108

Barometric Pressure Circuit Malfunction

•Harness and connector (If harness and connector are normal, replace volume air flow sensor assembly.)

Retained

P0111 P0112 P0113

Intake Air Temperature Circuit Malfunction

•Harness and connector •Intake air temperature sensor

Retained

P0116 P0117 P0118

Engine Coolant Temperature Circuit Malfunction

•Harness and connector •Engine coolant temperature sensor

Retained

P0121 P0122 P0123

Throttle Position Circuit Malfunction

•Harness and connector •Throttle position sensor •Closed throttle position switch

Retained

P0125 P0128

Excessive Time to Enter Closed Loop Fuel Control*

•Left bank O2 sensor (front) •Right bank O2 sensor (front) •O2 sensor harness and connector •Injector

Retained

P0132 P0133 P0134

O2 Sensor Circuit Malfunction (Bank 1 Sensor 1)

•Harness and connector [If harness and connector are normal, replace right bank O2 sensor (front).]

Retained

P0135

O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 1)

•Harness and connector •Right bank O2 sensor (front) heater

Retained

P0137 P0138 P0139

O2 Sensor Circuit Malfunction (Bank 1 Sensor 2)

•Harness and connector •Right bank O2 sensor (rear)

Retained

P0141

O2 Sensor Heater Circuit Malfunction (Bank 1 Sensor 2)

•Harness and connector •Right bank O2 sensor (rear) heater

Retained

P0152 P0153 P0154

O2 Sensor Circuit Malfunction (Bank 2 Sensor 1)

•Harness and connector [If harness and connector are normal, replace the left bank O2 sensor (front).]

Retained

P0155

O2 Sensor Heater Circuit Malfunction (Bank 2 Sensor 1)

•Harness and connector •Left bank O2 sensor (front) heater

Retained

P0157 P0158 P0159

O2 Sensor Circuit Malfunction (Bank 2 Sensor 2)

•Harness and connector •Left bank O2 sensor (rear)

Retained

P0161

O2 Sensor Heater Circuit Malfunction (Bank 2 Sensor 2)

•Harness and connector •Left bank O2 sensor (rear) heater

Retained

P0171 P0174

System too Lean Bank 1 Bank 2

•Volume air flow sensor output frequency •Injection •Fuel pressure •Intake air leaks •Engine coolant temperature sensor •Barometric pressure sensor •O2 Sensor •Exhaust manifold cracks

Retained

P0173 P0175

System too Rich Bank 1 Bank 2

Retained

P0201

Injector Circuit Malfunction - Cylinder 1

•Harness and connector •Injector

Retained

P0202

Injector Circuit Malfunction - Cylinder 2

P0203

Injector Circuit Malfunction - Cylinder 3

P0204

Injector Circuit Malfunction - Cylinder 4

P0205

Injector Circuit Malfunction - Cylinder 5

P0206

Injector Circuit Malfunction - Cylinder 6

P0300

Random Misfire Detected*

•Ignition coil •Ignition power transistor •Spark plug •Ignition circuit •Injector •02 Sensor •Compression pressure •Timing belt •Crankshaft position sensor •Air intake •Fuel pressure •Crankshaft position sensor circuit and connector

Retained

P0301

Cylinder 1 Misfire Detected*

•Ignition coil •Ignition power transistor •Spark plug •Ignition circuit •Injector •02 Sensor •Compression pressure •Timing belt •Crankshaft position sensor •Air intake •Fuel pressure •Crankshaft position sensor circuit and connector

Retained

P0302

Cylinder 2 Misfire Detected*

P0303

Cylinder 3 Misfire Detected*

P0304

Cylinder 4 Misfire Detected*

P0305

Cylinder 5 Misfire Detected*

P0306

Cylinder 6 Misfire Detected*

P0325

Knock Sensor Circuit 1 Malfunction

•Harness and connector (If harness and connector are normal, replace knock sensor.)

Retained

P0335

Crankshaft Position Sensor Circuit Malfunction

•Harness and connector (If harness and connector are normal, replace crankshaft position sensor.)

Retained

P0340

Camshaft Position Sensor Circuit Malfunction

•Harness and connector (If harness and connector are normal, replace camshaft position sensor.)

Retained

P0401

Exhaust Gas Recirculation Flow Malfunction

•Harness and connector •EGR valve •EGR solenoid •EGR valve control vacuum •Manifold differential pressure sensor

Retained

P0403

Exhaust Gas Recirculation Solenoid Malfunction

•Harness and connector •EGR solenoid

Retained

P0421

Warm Up Catalyst Efficiency Below Threshold (Bank 1)

•Right bank catalytic converter deteriorated •Right bank heated oxygen sensor failed •PCM failed

Retained

P0431

Catalyst Efficiency Below Threshold (Bank 2)

•Left bank catalytic converter deteriorated •Left bank heated oxygen sensor failed •PCM failed

Retained

P0441

Evaporative Emission Control System Incorrect Purge Flow

•Harness and connector •Evaporative emission purge solenoid

Retained

P0442

Evaporative Emission Control System Leak Detected

•Harness and connector •Evaporative emission purge solenoid •Evaporative emission ventilation solenoid •Vacuum hoses routing

Retained

P0443

Evaporative Emission Control System Purge Control Valve Circuit Malfunction

•Harness and connector •Evaporative emission purge solenoid

Retained

P0446

Evaporative Emission Control System Vent Control Malfunction

•Harness and connector •Evaporative emission ventilation solenoid

Retained

P0451 P0452 P0453

Evaporative Emission Control System Pressure Sensor Malfunction

•Harness and connector •Fuel tank differential pressure sensor

Retained

P0455

Evaporative Emission Control System Leak Detected (Gross Leak)

•Fuel tank filler tube cap loose •Fuel vent valve •Vacuum hose routing •Evaporative emission purge solenoid •Evaporative emission ventilation solenoid •Fuel tank pressure differential sensor •Evaporation emission canister •Engine coolant temperature sensor •Intake air temperature sensor •Power steering pressure switch

Retained

P0506 P0507

Idle Control System Malfunction

•Harness connector •Idle air control motor

Retained

P0510

Closed Throttle Position Switch Malfunction

•Harness and connector •Closed throttle position switch

Retained

P0551

Power steering pressure sensor circuit range/perfor- mance

•Harness and connector •Power steering pressure switch

Retained

P0705

Transmission Range Sensor Circuit Malfunction (RPNDL Input)

•Harness and connector •Park/Neutral position switch

Retained

P0712 P0713

Transmission Fluid Temperature Sensor Circuit Malfunction

•Harness and connector •Transaxle fluid temperature sensor

Retained

P0715

Input/Turbine Speed Sensor Circuit Malfunction

•Harness and connector •Pulse generator

Retained

P0720

Output/Turbine Speed Sensor Circuit Malfunction

•Harness and connector •Pulse generator

Retained

P0731

Gear 1 Incorrect Ratio

•Harness and connector •Input or output shaft speed sensor •Transaxle control CPU •PCM malfunction

Retained

P0732

Gear 2 Incorrect Ratio

P0733

Gear 3 Incorrect Ratio

P0734

Gear 4 Incorrect Ratio

P0736

Gear R Incorrect Ratio

P0741 P0742 P0743

Torque Converter Clutch System Malfunction

•Harness and connector •Torque converter clutch solenoid

Retained

P0753

Shift Solenoid A Malfunction

•Harness and connector •Low-Reverse solenoid

Retained

P0758

Shift Solenoid B Malfunction

•Harness and connector •Underdrive solenoid

Retained

P0763

Shift Solenoid C Malfunction

•Harness and connector •Second solenoid

Retained

P0768

Shift Solenoid D Malfunction

•Harness and connector •Overdrive solenoid

Retained

P1101

Vacuum control solenoid malfunction

•Harness and connector •Vacuum control solenoid •PCM malfunction

Retained

P1102

Ventilation control solenoid Malfunction

•Harness and connector •Ventilation control solenoid •PCM malfunction

Retained

P1400

Manifold Differential Pressure (MDP) Sensor Circuit Malfunction

•Harness and connector •MDP sensor

Retained

P1603

Battery Backup Circuit Malfunction

•Harness and connector

Retained

P1751

A/T Control Relay Malfunction

•Harness and connector •A/T control relay

Retained

NOTE: Do not replace the powertrain control module (PCM) until a thorough terminal check reveals there are no short/open circuits.
NOTE: Check that the PCM ground circuit is normal before checking for the cause of the problem.
NOTE: After the PCM detects a malfunction, a diagnostic trouble code is recorded when the engine is next started and the same malfunction is re-detected. However, for items marked with a "*", the diagnostic trouble code is recorded on the first detection of the malfunction.
NOTE: O2 : Heated oxygen sensor
NOTE: Sensor 1 : indicates sensors which are mounted closest to the engine and sensor 2 indicates sensors which are mounted at the position second closest to the engine.
NOTE: Bank 1 indicates the right bank side cylinder and bank 2 indicates the left bank side cylinder.