[Previous][Next]
Removal and Installation
cautionTo remove the curtain air bag module of vehicle with Curtain air bag, refer to  Service Precautions Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" and Curtain Air Bag Module(s) Removal and Installation.
Pre-removal and Post-installation Operation
Headlining Assembly Removal and Installation (Refer to Headlining Removal and Installation).
Removal steps
1.Shark fin antenna cover
2.Spring
3.Clip
4.Shark fin antenna base
•Glovebox case assembly (Refer to Glove Box and Center ventilator finisherRemoval and Installation)
•Floor console assembly (Refer to Floor Console Assembly Removal and Installation)
5.Antenna feeder (rear)
•AV control unit assembly  (Refer to Removal and Installation)
6.Antenna feeder (front)
 
 
REMOVAL SERVICE POINT
 
 
<<A>> ANTENNA FEEDER (FRONT) REMOVAL
Remove the antenna feeder (front) in the following procedure:
1. Remove the steering member (Refer to  Heater & cooling unit assembly Removal and Installation).
2. Remove the instrument panel wiring harness from the steering member.
3. Remove the antenna feeder (front) from the instrument panel wiring harness.