[Previous][Next]
Removal and Installation
 
 
Removal steps
1.Glove box and glove box damper connection
2.Glove box
3.Glove box cover
4.Glove box cushion
Instrument pad (passenger's side) (Refer to Removal and Installation).
5.Glove box case assembly
6.Glove box damper
7.Glove box case
Instrument panel center cover assembly (Refer to Removal and Installation).
Instrument lower center cover (Refer to Removal and Installation).
8.Center ventilator finisher assembly
A/C switch assembly (Refer to A/C SWITCH ASSEMBLY Removal and Installation).
9.Center ventilator finisher
Required Special Tool:
  • MB990784: Ornament Remover
 
 
REMOVAL SERVICE POINTS
 
 
<<A>> GLOVE BOX CASE ASSEMBLY REMOVAL
Remove the clips shown in the illustration using special tool MB990784.
 
 
 
<<B>> CENTER VENTILATOR FINISHER ASSEMBLY REMOVAL
Remove the clips shown in the illustration using special tool MB990784.