MOTOR (ELECTRIC MOTOR UNIT) REMOVAL AND INSTALLATION

REMOVAL AND INSTALLATION

danger

When servicing the high-voltage system parts, always wear the protective equipment or armour and always shut off the high-voltage by removing the service plug (Refer to PRECAUTIONS ON HOW TO USE THE HIGH-VOLTAGE VEHICLE

caution

When the rear motor (with built-in REMCU) is replaced, perform the vehicle specification writing (Refer to VEHICLE SPECIFICATION WRITING

Pre-removal Operation

EV coolant draining (Refer to EV COOLING SYSTEM - On-vehicle Service, Coolant Change EV COOLANT CHANGE).
Rear transaxle fluid draining (Refer to TRANSAXLE FLUID CHANGE).
Rear suspension member (Refer to REAR SUSPENSION - Rear Suspension Member Removal and Installation).

Post-installation Operation

Rear suspension member (Refer to REAR SUSPENSION - Rear Suspension Member Removal and Installation).
Rear transaxle fluid refilling (Refer to TRANSAXLE FLUID CHANGE).
EV coolant draining (Refer to EV COOLING SYSTEM - On-vehicle Service, Coolant Change EV COOLANT CHANGE).

			Removal steps
		1.	EV radiator piping hose R connection (Refer to WATER HOSE/WATER PIPE REMOVAL AND INSTALLATION)
		2.	Ground cable
		3.	Rear motor, rear tranaxle, rear motor mount bracket assembly
		4.	Rear motor stay
		5.	Rear motor front mount bracket
		6.	Rear motor mount bracket (RH)
		7.	Rear motor mount bracket (LH)
		8.	Harness bracket
		9.	Harness bracket
		10.	Rear motor, rear tranaxle assembly