VEHICLE SPECIFICATION WRITING
Required Special Tools:
- MB992744: Vehicle communication interface-Lite (V.C.I.-Lite)
- MB992745: V.C.I.-Lite main harness A
- MB992747: V.C.I.-Lite USB cable short
- MB992748: V.C.I.-Lite USB cable long
Using the M.U.T.-IIISE, write the vehicle specification in the BMU by the following procedures.
1. On the "System selection" screen, select "BMU".
2. Select "Configuration", then select "Automatic Configuration".
3. Write the vehicle specification by following the instructions on the screen.note | For the detailed procedures, refer to "M.U.T.-III SE User's Manual". |
4. On the "System selection" screen, select "BMU2".
5. Select "Configuration", then select "Automatic Configuration".
6. Write the vehicle specification by following the instructions on the screen.note | For the detailed procedures, refer to "M.U.T.-III SE User's Manual". |