SAVING AND WRITING BATTERY INFORMATION
| caution | - When replacing the BMU, save the battery information before the drive battery removal.
- After replacing the BMU, perform the following operations.
|
Required Special Tools:
- MB992744: Vehicle communication interface-Lite (V.C.I.-Lite)
- MB992745: V.C.I.-Lite main harness A
- MB992747: V.C.I.-Lite USB cable short
- MB992748: V.C.I.-Lite USB cable long
SAVING BATTERY INFORMATION
Using the M.U.T.-IIISE, save the battery information stored in the original BMU to the M.U.T.-IIISE by the following procedures.
1. On the "System selection" screen, select "BMU".
2. Select "Special function", then select "SAVING DATA".
3. Save the battery information by following the instructions on the screen.
WRITING BATTERY INFORMATION
Using the M.U.T.-IIISE, write the battery information saved in the M.U.T.-IIISE to the new BMU by the following procedures.
1. On the "System selection" screen, select "BMU".
2. Select "Special function", then select "WRITING DATA".
3. Write the battery information to the new BMU by following the instructions on the screen.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
