TRANSAXLE FLUID CHANGE
1.
Remove the filler plug and gasket.
2.
Remove the drain plug and gasket, to drain the fluid.
3.
Install the drain plug and new gasket, and tighten to the specified torque.
Tightening torque: 32 ± 2 N·m (24 ± 1 ft-lb)
4.
Fill the fluid up to the lower edge of the filler plug hole.
Brand name: MITSUBISHI MOTORS GENUINE ATF SP III
Quantity: 0.85 dm
3
(0.898 qt)
5.
Install the filler plug and new gasket, and tighten to the specified torque.
Tightening torque: 32 ± 2 N·m (24 ± 1 ft-lb)
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)
)