[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Removal step
Air guide upper panel (Refer to Front Bumper FRONT BUMPER ASSEMBLY REMOVAL AND INSTALLATION)
1.Hood lock cover
2.Hood lock
3.Hood lock release handle
Dash side finisher (Refer to Interior Trim REMOVAL AND INSTALLATION)
Instrument lower panel LH assembly (Refer to Instrument Panel Driver's Side Removal and Installation)
Front fender protector (Refer to Front Fender Protector/Rear Wheel House Protector REMOVAL AND INSTALLATION)
Front bumper assembly (Refer to Front Bumper FRONT BUMPER ASSEMBLY REMOVAL AND INSTALLATION)
4.Hood lock release cable
Distance sensor (Refer to Distance Sensor Removal and Installation)
5.Secondary striker bracket assembly
 
 
REMOVAL SERVICE POINT
 
 
<<A>> HOOD LOCK RELEASE HANDLE REMOVAL
Wrap a cord around the hood lock release handle as shown in the figure, and pull it toward the direction of the arrow to remove the hood lock release handle.