[Previous][Next]
REMOVAL AND INSTALLATION
 
 
caution
  • When you remove/install or replace the front bumper assembly and camera, you should check the camera image on the multi-around monitor "Bird-eye view." If necessary, calibrate the monitor (Refer to Basic Inspection for Multi-around Monitor Work Procedure). <Vehicles with multi-around monitor>
  • To ensure the camera image is clearly visible, wipe the lens with a damped rag and then a dry rag to remove dust, rain drops or snow.
  • Be careful not to damage the camera. Any damage may have an adverse effect on the screen image.
Pre-removal Operation
  • Front Fillet Molding Mount (Front Bumper Side) Removal (Refer to REMOVAL AND INSTALLATION).
  • Engine Room Under Cover Front A Mount (Front Bumper Side) Removal (Refer to UNDER COVER REMOVAL AND INSTALLATION).
  • Headlight Washer Hose Disconnection <Vehicles with Headlight Washer>
  • Front Wiring Harness and Front Bumper Wiring Harness Combination Connector Disconnection
  • Front Fender Protector (Front Bumper Side) Mount Clips Removal (Refer to REMOVAL AND INSTALLATION)
Post-installation Operation
  • Front Fender Protector (Front Bumper Side) Mount Clips Installation (Refer to REMOVAL AND INSTALLATION)
  • Front Wiring Harness and Front Bumper Wiring Harness Combination Connector Connection
  • Headlight Washer Hose Connection <Vehicles with Headlight Washer>
  • Washer Filling <Vehicles with Headlight Washer>
  • Engine Room Under Cover Front A Installation (Refer to UNDER COVER REMOVAL AND INSTALLATION.)
  • Front Fillet Molding Mount (Front Bumper Side) Installation (Refer to REMOVAL AND INSTALLATION.)
  • Front Fog Light Aiming Adjustment (Refer to Front Fog Light Aiming FRONT FOG LIGHT AIMING ADJUSTMENT) <Vehicles with Front Fog Light>.
Removal steps
1.Air guide upper panel
2.Front bumper assembly
3.Front bumper center reinforcement
4.Front bumper upper core
Secondary striker bracket assembly (Refer to Hood Lock REMOVAL AND INSTALLATION)
Horn (Refer to Horn Removal and Installation)
5.Front bumper reinforcement
6.Front bumper reinforcement lower