![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
| caution | During troubleshooting, a DTC code associated with another system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, confirm all systems for DTC code(s). If DTC code(s) are set, erase them all. |
| Trouble symptom | Inspection procedure No. | Reference page |
| The ignition key cylinder illumination light does not illuminate/extinguish normally. | 1 |  |
| Defective power supply system of the ignition switch. | 2 | |
| Even when the selector lever is in the P position, the ignition switch cannot be turned to the LOCK (OFF) position. / When the selector lever is in other than the P position, the ignition switch can be turned to the LOCK (OFF) position. | 3 | |