Cannot communicate with KOS-ECU using the scan tool. | 1 | |
The keyless operation key cannot be registered using scan tool. | 2 | |
Abnormality in KOS-ECU power supply and ground circuits. | 3 | |
Keyless operation warning display does not disappear. | 4 | |
No door will be locked or unlocked by operating a lock/unlock switch on any door. | 5 | |
Driver's door lock/unlock switch does not work. | 6 | |
Front passenger's door lock/unlock switch does not work. | 7 | |
The lock switch and open switch of the liftgate lock release handle do not work. | 8 | |
The lock switch of the liftgate lock release handle does not perform the locking operation. | 9 | |
The open switch of the liftgate lock release handle does not perform the unlocking operation. | 10 | |
KOS timer lock function does not work. | 11 | |
Keyless entry system does not work. | 12 | |
The timer lock function does not work after the doors have been unlocked by the keyless entry system. | 13 | |
Keyless entry hazard light answerback function, the dome light answerback function or the horn answerback function does not work normally. | 14 | |
Multimode keyless entry function does not work at all. | 15 | |
Outer tone alarm does not sound. | 16 | |
Power door locks with selective unlocking does not work. | 17 | |