[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Post-installation operation
  • Clearance check around the hood (Refer to .)
  • Adjustment of the hood level and hood striker engagement (Refer to .)
  • Adjustment of hood height (Refer to .)
Damper removal
1.Damper
2.Damper
Headlight support upper panel cover (Refer to GROUP 51 - Front Bumper Assembly .)
Hood latch and hood lock release cable removal steps
Headlight support upper panel cover (Refer to GROUP 51 - Front Bumper Assembly .)
3.Hood latch
Cowl side trim <driver’s side> (Refer to GROUP 52A - Interior Trim .)
4.Hood lock release handle
Front splash shield <driver’s side> (Refer to .)
5.Hood lock release cable
6.Hood insulator
7.Grommet
8.Hood weatherstrip
Windshield washer hose and washer nozzles (Refer to GROUP 51 - Windshield Washer .)
9.Hood
10.Hood support rod
Front deck garnish (Refer to GROUP 51 - Windshield wiper .)
<<A>>9.Hood hinge
 
 
REMOVAL SERVICE POINT
 
 
<<A>> HOOD HINGE REMOVAL
1. Apply protective tapes to the fender (resin-made) to prevent it from damage.
2. Remove the hood hinge mounting bolts while pulling the fender (resin-made) outward.