STEP 7. Check whether the DTC is set again.
(1) Erase the DTC.
(2) Turn the ignition switch to the "OFF" position.
(3) Turn the ignition switch to the "ON" position.
(4) Turn the ignition switch to the "OFF" position.
(5) Turn the ignition switch to the "ON" position.
(6) Check that the ABS warning light goes out.
Is DTC No.U1195 or U1197 set?
Replace the hydraulic unit (ASC-ECU) (Refer to ). Then go to Step 8. The trouble can be an intermittent malfunction (Refer to GROUP 00 - How to Use Troubleshooting/How to Cope with Intermittent Malfunctions ).