[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Pre-removal and Post-installation Operation
  • Discharging and recharging refrigerant (Refer to ).
  • Air cleaner intake duct (Refer to GROUP 15 - Air Cleaner ).
  • Hood latch (Refer to GROUP 42A - Hood ).
Removal steps
1.Baffle plate (LH)
2.Baffle plate (RH)
•Headlight support panel upper (Refer to GROUP 42A - Loose Panel ).
3.Air guide side plate (LH)
4.Air guide side plate (RH)
<<A>>>>A<<5.A/C compressor discharge hose connection
6.O-ring
7.Clamp
<<A>>8.A/C condenser outlet pipe connection
9.O-ring
10.A/C condenser assembly
noteCondenser fan removal and installation refer to GROUP 14 - Radiator .
 
 
REMOVAL SERVICE POINT
 
 
<<A>> A/C COMPRESSOR DISCHARGE HOSE AND A/C CONDENSER OUTLET PIPE DISCONNECTION
cautionUse the plug which is not breathable because A/C compressor oil or receiver have high hygroscopicity.
Plug the removed nipple of the pipe, hose and condenser to prevent the entry of dust and dirt.
 
 
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< A/C COMPRESSOR DISCHARGE HOSE INSTALLATION
Assemble the clamp into the condenser assembly, and then assemble the A/C condenser discharge hose into the clamp.