[Previous][Next]
REMOVAL AND INSTALLATION
 
 
<Up to 20 Model year>
caution
  • When removing or installing the mass airflow sensor, be careful not to apply impact to the sensor.
  • Do not reuse the mass airflow sensor that has been dropped.
Removal steps
1.Air cleaner intake duct
2.Hose protector <Some models>
3.Hose protector <Some models>
4.Breather hose
5.Air cleaner air intake hose
>>A<<6.Mass airflow sensor
7.O-ring
8.Air cleaner cover
9.Air cleaner element
10.Air cleaner body
Engine control module (Refer to GROUP 13A - Engine Control Module )
11.Air cleaner bracket
 
 
<From 22 Model year>
caution
  • When removing or installing the mass airflow sensor, be careful not to apply impact to the sensor.
  • Do not reuse the mass airflow sensor that has been dropped.
Removal steps
1.Air cleaner intake duct
2.Hose protector
3.Hose protector
4.Breather hose
5.Air cleaner air intake hose
>>A<<6.Mass airflow sensor
7.O-ring
8.Air cleaner cover
9.Air cleaner element
10.Air cleaner body
Engine control module (Refer to GROUP 13A - Engine Control Module )
11.Air cleaner bracket
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< MASS AIRFLOW SENSOR INSTALLATION
1. Install the mass airflow sensor to the air cleaner cover with care not to damage the O-ring.
2.
cautionDo not over-tighten. If the mounting screw is over-tightened, the air cleaner cover can be damaged.
Tighten the mounting screws to the specified torque.
Tightening torque: 1.5 ± 0.3 N·m (13 ± 2 in-lb)