55-REFRIGERANT LINE REMOVAL AND INSTALLATION

REMOVAL AND INSTALLATION

Pre-removal and Post-installation Operation

Discharging and Recharging refrigerant (Refer to

			A/C pressure sensor removal steps
<<A>>		1.	A/C pressure sensor
<<A>>		7.	O-ring
			A/C compressor suction hose and exchanger pipe sub-assembly removal steps
		•	Dash panel heat protector (Refer to GROUP 42A - Loose Panel ).
<<A>>		2.	A/C compressor suction hose
		10.	Clamp <From 22 Model year>
<<A>>		3.	A/C pipe assembly
<<A>>		7.	O-ring
			A/C condenser outlet pipe and A/C compressor discharge hose removal steps
		•	Air Cleaner Intake Duct Removal and Installation (Refer to GROUP 15 - Air Cleaner )
		•	Headlight support panel cover Removal and Installation (Refer to GROUP 51 - Front Bumper and Radiator Grille ).
<<A>>	>>A<<	4.	A/C compressor discharge hose
<<A>>		7.	O-ring
		5.	Clamp
<<A>>		6.	A/C condenser outlet pipe
<<A>>		7.	O-ring
			Expansion valve removal steps
		•	Dash panel heat protector (Refer to GROUP 42A - Loose Panel ).
<<A>>		2.	A/C compressor suction hose connection
<<A>>		7.	O-ring
<<A>>		6.	A/C condenser outlet pipe connection
<<A>>		7.	O-ring
		10.	Clamp <From 22 Model year>
<<A>>		3.	A/C pipe assembly
<<A>>		7.	O-ring
		8.	Expansion valve cover <some models>
<<A>>		9.	Expansion valve

REMOVAL SERVICE POINT

<<A>> HOSE AND PIPE REMOVAL

caution

Use the plug which is not breathable because A/C compressor oil or receiver have high hygroscopicity.

Plug the nipple of condenser, compressor, and expansion valve to prevent the entry of dust and dirt.

INSTALLATION SERVICE POINT

>>A<< A/C COMPRESSOR DISCHARGE HOSE INSTALLATION

Assemble the clamp into the condenser assembly, and then assemble the A/C condenser discharge hose into the clamp.