[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Waterproof film removal steps
Door trim assembly (Refer to GROUP 52A, Door Trim )
>>B<<1.Waterproof film
Door speaker bracket removal steps
Door trim assembly (Refer to GROUP 52A, Door Trim )
>>B<<1.Waterproof film
2Door speaker bracket
Door working hole cover front and door working hole cover rear removal steps
Door trim assembly (Refer to GROUP 52A, Door Trim )
>>B<<1.Waterproof film
3.Door working hole cover front
4.Door working hole cover rear
Door window glass runchannel removal
5.Door window glass runchannel
Door window glass runchannel rear removal steps
Door trim assembly (Refer to GROUP 52A, Door Trim )
>>B<<1.Waterproof film
2Door speaker bracket
3.Door working hole cover front
4.Door working hole cover rear
6.Door window rear lower sash
7.Door window glass runchannel rear
Door sash molding removal steps
Door window glass assembly <Front door> (Refer to )
Front door delta garnish (Refer to GROUP 51, Delta Garnish/Door Center Pillar Garnish/Quarter Garnish )
<<A>>8.Door beltline molding
9.Door sash molding
Door opening weatherstrip lower removal steps
Front door delta garnish (Refer to GROUP 51, Delta Garnish/Door Center Pillar Garnish/Quarter Garnish )
10.Door opening weatherstrip lower
Door opening weatherstrip outer removal steps
Front door delta garnish (Refer to GROUP 51, Delta Garnish/Door Center Pillar Garnish/Quarter Garnish )
<<B>>11.Door opening weatherstrip outer
Door opening weatherstrip inner removal steps
Cowl side trim and front scuff plate (Refer to GROUP 52A, Interior Trim )
12.Door check connecting bolt
>>A<<13.Door opening weatherstrip inner
 
 
Waterproof film removal steps
Door trim assembly (Refer to GROUP 52A, Door Trim )
>>B<<1.Waterproof film
Door speaker bracket removal steps
Door trim assembly (Refer to GROUP 52A, Door Trim )
>>B<<1.Waterproof film
2.Door speaker bracket
Door working hole cover removal steps
Door trim assembly (Refer to GROUP 52A , Door Trim )
>>B<<1.Waterproof film
3.Door working hole cover
Door sash molding removal steps
Door window glass assembly <Rear door> (Refer to )
<<A>>4.Door beltline molding
Rear door center pillar garnish (Refer to GROUP 51, Delta Garnish/Door Center Pillar Garnish/Quarter Garnish )
Rear door garnish rear (Refer to GROUP 51, Delta Garnish/Door Center Pillar Garnish/Quarter Garnish )
5.Door sash molding
Door window glass runchannel removal
6.Door window glass runchannel
Door opening weatherstrip outer removal steps
7.Door check connecting bolt
<<B>>8.Door opening weatherstrip outer
Door opening weatherstrip inner removal steps
Cowl side trim and front scuff plate (Refer to GROUP 52A, Interior Trim )
7.Door check connecting bolt
>>A<<9.Door opening weatherstrip inner
 
 
REMOVAL SERVICE POINTS
 
 
<<A>> DOOR BELTLINE MOLDING REMOVAL
Insert a flat-tipped screwdriver as shown, and pry it in the direction shown to remove the door beltline molding.
 

 
 
<<B>> DOOR OPENING WEATHERSTRIP OUTER REMOVAL
Make the tool as shown in the figure, and remove the weatherstrip from the door panel.
 
 
 
 
INSTALLATION SERVICE POINTS
 
 
>>A<< DOOR OPENING WEATHERSTRIP INNER INSTALLATION
Align the mark on the door opening weatherstrip inner with the notch at the vehicle body side as shown.
 


 
 
>>B<< WATERPROOF FILM INSTALLATION
cautionWhen a waterproof film is applied, guide the butyl rubber tape under the inner panel drain hole.
Apply the specified adhesive to the water-proof film as shown in the figure and stick the film.
Specified adhesive: 3M™ AAD Part No. 8625 or equivalent