[Previous][Next]
DIAGNOSTIC TROUBLE CODE CHART
cautionDuring diagnosis, a diagnostic trouble code (DTC) associated with other system may be set when the ignition switch is turned to the "ON" position with connector(s) disconnected. On completion, confirm all systems for DTC(S). If DTC(s) are set, erase them all.
DTCScan tool (M.U.T.-III) displayReference page
C1011FL wheel speed sensor signal
C1014FL wheel speed SNS.performance
C101CFR wheel speed sensor signal
C101FFR wheel speed SNS.performance
C1027RL wheel speed sensor signal
C102ARL wheel speed SNS.performance
C1032RR wheel speed sensor signal
C1035RR wheel speed SNS.performance
C1041FL wheel speed tone performance
C1042FR wheel speed tone performance
C1043RL wheel speed tone performance
C1044RR wheel speed tone performance
C1200FR wheel speed sensor
C1205FL wheel speed sensor
C1210RR wheel speed sensor
C1215RL wheel speed sensor
C1222Wheel SPD.SNSR.power circuit
C1225Deviation between wheel speed
C1226FR inlet valve
C1231FR outlet valve
C1236FL inlet valve
C1241FL outlet valve
C1246RR inlet valve
C1251RR outlet valve
C1256RL inlet valve
C1261RL outlet valve
C1266Motor stuck
C1271Motor drive circuit
C1273Motor drive circuit stuck off
C1274Motor drive circuit stuck on
C1276Valve power supply circuit
C1278Valve power circuit stuck off
C1279Valve power circuit stuck on
C1291Reverse switch <M/T>
C1300FR cut valve
C1305FR suction valve
C1310FL cut valve
C1315FL suction valve
C1340Stoplight switch
C1361M/C pressure SNSR.stuck/low gain
C1364M/C pressure SNSR.malfunction
C1366Lateral G SNSR.stuck/low gain
C1371Yaw rate SNSR.stuck/low gain
C1381Longitudinal G stuck/low gain
C1385Yaw rate sensor
C1387Lateral G sensor/G performance
C1392INCOMP.learn (Longitudinal G)
C1394INCOMP.learn neutral(SAS)
C1395INCOMP. Brake fluid filling
C1396Engine torque input refusal
C1505Steering angle sensor
C1506Steering angle sensor error
C1555Steering angle SNS.out of range
C1607ECU failure
C1608EEPROM fail
C1707Implausible coding data
C1860Power supply high voltage
C1861Power supply low voltage
C2206Re-execution of variant coding
U0401Engine (CAN message)
U0402T/M (CAN message)
U0428SAS (CAN message)
U1073Bus-off
U1100Engine CAN timeout
U1101T/M CAN timeout/Not equipped
U1104SAS CAN timeout/Not equipped
U1108Meter CAN timeout/Not equipped
U1109ETACS CAN timeout/Not equipped
U1195Coding not completed
U1200SAS parity error
U1204SAS message counter error
U1211ENG Parity/Toggle bit error