REMOVAL AND INSTALLATION
Post-installation operation
Back door alignment (Refer to
BACK DOOR ADJUSTMENT
)
Back door close switch removal
1.
Back door close switch
Striker removal steps
•
Luggage Rear Plate (Refer to Interior Trim
Removal and Installation
)
2.
Striker
Automatic back door buzzer removal steps
•
Back door inner finisher (Refer to Back Door Trim
Removal and Installation
)
3.
Electric back door buzzer
Back door lock release handle removal steps
•
Back door lower trim (Refer to Back Door Trim
Removal and Installation
)
4.
Back door lock release handle
Back door latch removal steps
•
Back door inner finisher (Refer to Back Door Trim
Removal and Installation
)
5.
Back door latch assembly
Back door sensor removal
6.
Touch sensor
Automatic back door control unit ECU removal steps
•
Luggage side upper finisher (Refer to Luggage Trim
Removal and Installation
)
7.
Automatic back door control unit
Automatic back door switch removal steps
8.
Instrument lower panel assembly (Refer to Instrument panel driver's side
Removal and Installation
)
9.
Automatic back door switch
INSTALLATION SERVICE POINTS
>>A<< STRIKER INSTALLATION
Install the striker so that the striker center does not deviate more than ±1.5 mm (0.06 inch) from the latch center.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)
)
