REMOVAL AND INSTALLATION
Post-installation operation
Back door alignment (Refer to
BACK DOOR ADJUSTMENT
)
Striker removal steps
•
Luggage Rear Plate (Refer to Interior Trim
Removal and Installation
)
1.
Striker
Back door lock release handle removal steps
•
Back door inner finisher (Refer to Back Door Trim
Removal and Installation
)
•
Rear wiper motor assembly (Refer to Rear Wiper
Removal and Installation
)
2.
Back door lock release handle
Back door latch removal steps
•
Back door inner finisher (Refer to Back door Trim
Removal and Installation
)
3.
Back door latch assembly
INSTALLATION SERVICE POINTS
>>A<< STRIKER INSTALLATION
Install the striker so that the striker center does not deviate more than ± 1.5 mm (0.06 inch) from the latch center.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)
)
