[Previous][Next]
Removal and Installation
 
 
Rear wiper motor assembly removal steps
1.Rear wiper refill
2.Rear wiper blade assembly
3.Rear wiper arm cover
4.Rear wiper arm assembly
Back door inner finisher (Refer to Removal and Installation.)
5.Rear wiper motor assembly
6.Pivot seal
Rear washer nozzle and tube removal steps
Back door spoiler (Refer to Removal and Installation.)
7.Rear washer nozzle assembly
8.Rear washer tube
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< REAR WIPER ARM AND BLADE ASSEMBLY INSTALLATION
Assemble the wiper blade so that their edge stops at the specified position.
Standard value
(A): Φ 2 marking ± 5 mm (0.2 inch)