Removal and Installation

REMOVAL AND INSTALLATION

Pre-removal and Post-installation Operation

Recycle Refrigerant/Charge (Refer to Recycle Refrigerant/Charge Refrigerant)
Air cleaner intake duct removal and installation(Refer to Air cleaner AIR CLEANER REMOVAL AND INSTALLATION)
Front bumper removal and installation (Refer to Front bumperRemoval and Installation)
Hood latch and cable removal and installation (Refer to Hood latch and cableREMOVAL AND INSTALLATION)

			Removal steps
		1.	Front side air guide LH
		2.	Rear side air guide LH
		3.	Front side air guide RH
		4.	Rear side air guide RH
		5.	Air guide lower
		.	Horn (Refer to HornRemoval and Installation)
		6.	Side air guide lower LH
		7.	Side air guide lower RH
		.	Ambient sensor (Refer to Ambient sensor Removal and Installation)
		8.	Air guide grille
		9.	Disconnect A/C pipe
		10.	O-ring
		11.	Condenser

REMOVAL SERVICE POINT

<<A>> DISCONNECT A/C PIPE

caution

Use the plug which is not breathable because A/C compressor oil or receiver have high hygroscopicity.

Plug the removed nipple of the pipe, hose and condenser to prevent the entry of dust and dirt.