[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Pre-removal and Post-installation Operation
Hood lock and hood lock release cable removal steps
Front bumper assembly (Refer to Front Bumper Removal and Installation)
1.Hood latch cover
2.Hood lock
3.Hood lock release handle
Dash side finisher (Refer to Interior Trim Removal and Installation)
Instrument lower panel assembly (Refer to Instrument panel passenger's side Removal and Installation)
Front fender protector (Refer to Splash Shield REMOVAL AND INSTALLATION)
4.Hood lock release cable
5.Secondary striker bracket assembly
 
 
REMOVAL SERVICE POINT
 
 
<<A>> HOOD LOCK RELEASE HANDLE REMOVAL
Wrap a cord around the hood lock release handle as shown in the figure, and pull it toward the direction of the arrow to remove the hood lock release handle.