| | . | Front bumper (Refer to Front bumperRemoval and Installation ) |
| | 1. | Refrigerant pressure sensor |
| | | Expansion valve (for heating) removal steps |
| | . | Front bumper (Refer to Front bumperRemoval and Installation) |
| | 2. | High-pressure pipe D |
| | 30. | O-ring |
| | 3. | High-pressure pipe C |
| | 30. | O-ring |
| | 4. | Expansion valve (for heating) |
| | | High-pressure flexible hose C removal steps |
| | . | Front bumper (Refer to Front bumperRemoval and Installation) |
| | . | Engine room side cover RH (Refer to Under coverRemoval and Installation) |
| | . | Fender protector RH (Refer to Splash shieldREMOVAL AND INSTALLATION) |
| | . | Washer tank inlet (Refer to Washer tankRemoval and Installation) |
| | 5. | High-pressure flexible hose C |
| | 30. | O-ring |
| | | Condenser outlet temperature sensor removal steps |
| | 6. | Insulator |
| | 7. | Condenser outlet temperature sensor |
| | | High-pressure flexible hose A, High-pressure pipe B removal steps |
| | . | Front bumper (Refer to Front bumperRemoval and Installation) |
| | . | Engine room side cover RH (Refer to Under coverRemoval and Installation) |
| | . | Fender protector RH (Refer to Splash shieldREMOVAL AND INSTALLATION) |
| | . | Washer tank inlet (Refer to Washer tankRemoval and Installation) |
| | 8. | High-pressure flexible hose A |
| | 30. | O-ring |
| | . | Dash panel heat protector (Refer to Loose panel REMOVAL AND INSTALLATION) |
| | 33. | Remove the high-pressure pipe B from the cramp. |
| | 9. | High-pressure pipe B |
| | 30. | O-ring |
| | | A/C refrigerant condenser outlet temperature sensor removal steps |
| | 10. | Insulator |
| | 11. | A/C refrigerant condenser outlet temperature sensor |
| | | High-pressure flexible hose A, Low-pressure flexible hose, High-pressure pipe A removal steps |
| | . | Air cleaner assembly (Refer to Air cleaner AIR CLEANER REMOVAL AND INSTALLATION) |
| | . | Headlight support upper panel (Refer to Loose panel REMOVAL AND INSTALLATION) |
| | 12. | High-pressure flexible hose A |
| | 30. | O-ring |
| | 13. | Low-pressure flexible hose |
| | 30. | O-ring |
| | . | Dash panel heat protector (Refer to Loose panel REMOVAL AND INSTALLATION) |
| | 31. | Remove the high-pressure pipe A from the cramp. |
| | 14. | High-pressure pipe A |
| | 30. | O-ring |
| | | A/C compressor outlet temperature sensor removal steps |
| | 15. | Insulator |
| | 16. | A/C compressor outlet temperature sensor |
| | | Battery cooling pipe removal steps |
| | . | Air cleaner assembly (Refer to Air cleaner AIR CLEANER REMOVAL AND INSTALLATION) |
| | . | Dash panel heat protector (Refer to Loose panel REMOVAL AND INSTALLATION) |
| | 35. | Clamp |
| | 17. | High pressure pipe for battery cooling |
| | 30. | O-ring |
| | 18. | Low pressure pipe for battery cooling |
| | 30. | O-ring |
| | | Low-pressure pipe A, A/C evaporator compression regulator, Low-pressure pipe B removal steps |
| | 19. | Low-pressure pipe A |
| | 30. | O-ring |
| | 20. | A/C evaporator compression regulator |
| | . | Air cleaner assembly (Refer to Air cleaner AIR CLEANER REMOVAL AND INSTALLATION) |
| | . | Cowl top panel (Refer to Loose panel REMOVAL AND INSTALLATION) |
| | . | Dash panel heat protector (Refer to Loose panel REMOVAL AND INSTALLATION) |
| | 34. | Remove the low-pressure pipe B from the cramp. |
| | 21. | Low-pressure pipe B |
| | 30. | O-ring |
| | | Evaporator outlet temperature sensor removal steps |
| | 22. | Insulator |
| | 23. | Evaporator outlet temperature sensor |
| | | High-pressure pipe E, F removal steps |
| | . | Engine room side cover RH (Refer to Under coverRemoval and Installation) |
| | . | Fender protector RH (Refer to Splash shieldREMOVAL AND INSTALLATION) |
| | . | Washer tank inlet (Refer to Washer tankRemoval and Installation) |
| | 24. | High-pressure pipe E |
| | 30. | O-ring |
| | 32. | Remove the high-pressure pipe F from the cramp. |
| | 25. | High-pressure pipe F |
| | 30. | O-ring |
| | | Expansion valve (for cooling) removal steps |
| | . | Air cleaner assembly (Refer to Air cleaner AIR CLEANER REMOVAL AND INSTALLATION) |
| | . | Cowl top panel (Refer to Loose panel REMOVAL AND INSTALLATION) |
| | . | Dash panel heat protector (Refer to Loose panel REMOVAL AND INSTALLATION) |
| | 32. | Remove the high-pressure pipe F from the cramp. |
| | 25. | High-pressure pipe F |
| | 30. | O-ring |
| | 26. | Low-pressure pipe G |
| | 30. | O-ring |
| | 27. | Expansion valve (for cooling) |
| | | A/C joint removal steps |
| | . | Air cleaner assembly (Refer to Air cleaner AIR CLEANER REMOVAL AND INSTALLATION) |
| | . | Cowl top panel (Refer to Loose panel REMOVAL AND INSTALLATION) |
| | . | Dash panel heat protector (Refer to Loose panel REMOVAL AND INSTALLATION) |
| | 21. | Low-pressure pipe B |
| | 30. | O-ring |
| | 26. | Low-pressure pipe G |
| | 30. | O-ring |
| | 28. | Joint cover |
| | 29. | A/C joint |
| | | A/C pipe bracket removal steps |
| | 16. | A/C compressor outlet temperature sensor |
| | 31.32.33.34. | Clamp, Clip |
| | 36. | A/C pipe bracket |
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
)