[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Pre-removal and Post-installation Operation
Removal steps
EV oil cooler hoses A and B removal steps
Side air guide (Refer to Heater & Air Conditioning System - Condenser Removal and Installation)
1.EV oil cooler hose A
2.EV oil cooler hose B
EV oil cooler hose C removal steps
Front bumper (Refer to Body Exterior, Doors, Roof & Vehicle Security - Exterior, Front Bumper Assembly Removal and Installation)
3.EV oil cooler hose C
EV oil cooler pipe B removal steps
Engine room side cover (Refer to Body Exterior, Doors, Roof & Vehicle Security - Exterior, Under Cover Removal and Installation)
Splash shield (Refer to Body Exterior, Doors, Roof & Vehicle Security - Exterior, Splash Shield REMOVAL AND INSTALLATION)
4.EV oil cooler pipe B
EV oil cooler hose J removal steps
Engine room side cover (Refer to Body Exterior, Doors, Roof & Vehicle Security - Exterior, Under Cover Removal and Installation)
5.EV oil cooler hose J
EV oil cooler pipe C removal steps
Engine room side cover (Refer to Body Exterior, Doors, Roof & Vehicle Security - Exterior, Under Cover Removal and Installation)
Power drive unit (Refer to POWER DRIVE UNIT REMOVAL AND INSTALLATION)
6.EV oil cooler pipe C
EV oil cooler hose F removal steps
Power drive unit (Refer to POWER DRIVE UNIT REMOVAL AND INSTALLATION)
7.EV oil cooler hose F
EV oil cooler hose H removal steps
Engine room side cover (Refer to Body Exterior, Doors, Roof & Vehicle Security - Exterior, Under Cover Removal and Installation)
8.EV oil cooler hose H
EV oil cooler hose I removal steps
Engine room under cover front A and B (Refer to Body Exterior, Doors, Roof & Vehicle Security - Exterior, Under Cover Removal and Installation)
9.EV oil cooler hose I
EV oil cooler hose G removal steps
Power drive unit (Refer to POWER DRIVE UNIT REMOVAL AND INSTALLATION)
10.EV oil cooler hose G

 
 
REMOVAL SERVICE POINT
 
 
<<A>> EV OIL COOLER HOSE REMOVAL
Make mating marks on the hose and the hose clip as shown to install them in the original position.
 
 
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< EV OIL COOLER HOSE INSTALLATION
1. Insert the hose until the protrusion of the pipe.
2. Align the mating marks on the hose and hose clip.