DTC No. P0A3D-00 RMCU Phase IGBT1 temperature-high
DTC No. P30E8-98 RMCU Phase IGBT2 temperature-high
DTC No. P30E9-98 RMCU Phase IGBT3 temperature-high
DTC No. P30EA-98 RMCU Phase IGBT4 temperature-high
DTC No. P30EB-98 RMCU Phase IGBT5 temperature-high
DTC No. P30EC-98 RMCU Phase IGBT6 temperature-high
MONITOR EXECUTION
Continuous
MONITOR EXECUTION CONDITIONS (Other monitor and Sensor)
Other Monitor (There is no temporary DTC set in memory for the item monitored below)
Not applicable
Sensor (The sensor below is determined to be normal)
Rear motor IGBT temperature sensor
DTC SET CONDITIONS
Logic Flow Chart
Check Condition
REMCU power supply voltage is 8.0 volts or more.
Judgment Criterion
The IGBT temperature is 156°C (319°F) or more for 1 second or more.
OBD-II DRIVE CYCLE PATTERN
Refer to OBD-II Drive Cycle
OBD-II DRIVE CYCLE
.
TROUBLESHOOTING HINTS
Malfunction of the rear motor assembly (malfunction of the thermistor circuit system, malfunction of the REMCU, malfunction of the motor)
Malfunction of the PHEV-ECU system (malfunction of the electric water pump)
Malfunction of the EV water cooling system
Malfunction of the radiator fan system
DIAGNOSIS
Required Special Tools:
MB992744: Vehicle communication interface-Lite (V.C.I.-Lite)
MB992745: V.C.I.-Lite main harness A
MB992747: V.C.I.-Lite USB cable short
MB992748: V.C.I.-Lite USB cable long
1.
M.U.T.-IIISE other DTC check
Check whether the REMCU sets the DTCs related to temperature sensor (characteristic error, upper limit error, lower limit error).
Is the DTC set?
Troubleshoot the set DTC (Refer to
DIAGNOSTIC TROUBLE CODE CHART
). Then,
2.
M.U.T.-IIISE other DTC check
Check whether the PHEV-ECU sets the following DTCs.
DTC No. P3123-15 Water Pump monitor circuit-High
DTC No. P3124-11 Water Pump monitor circuit-Low
DTC No. P3125-01 Water Pump Function Monitor A
DTC No. P3126-01 Water Pump Function Monitor B
DTC No. P3127-9F Water Pump Function Monitor C
DTC No. P3128-9E Water Pump Function Monitor D
Is the DTC set?
Troubleshoot the set DTCs (Refer to
DIAGNOSTIC TROUBLE CODE CHART
). Then,
3.
M.U.T.-IIISE other system DTC
Check whether the PHEV-ECU sets the DTC related to the radiator fan.
Is the DTC set?
Troubleshoot the set DTC (Refer to PHEV-ECU – DIAGNOSTIC TROUBLE CODE CHART
DIAGNOSTIC TROUBLE CODE CHART
). Then,
4.
Check of the EV water cooling system
Check the EV water cooling system (Refer to
EV COOLANT LEAK CHECK
).
Is the check result normal?
Replace the rear motor assembly (Refer to
MOTOR (ELECTRIC MOTOR UNIT) REMOVAL AND INSTALLATION
). Then,
Repair or replace the faulty part. Then, replace the rear motor assembly (Refer to
MOTOR (ELECTRIC MOTOR UNIT) REMOVAL AND INSTALLATION
). Then,
5.
Test the OBD-II drive cycle.
(1)
Carry out a test drive with the drive cycle pattern. Refer to OBD-II Drive Cycle
OBD-II DRIVE CYCLE
.
(2)
Check the DTC.
Is the DTC set?
Retry the troubleshooting.
The procedure is complete.