[Previous][Next]
Removal and Installation
 
 
caution
  • Perform "Configuration" to save or print current vehicle specification when before replacing multi-around monitor control unit. For details, refer to Description.
  • When you replace the multi-around monitor control unit, you should teach the multi-around monitor control unit for the multi-around monitor by writing a learned value. On completion, you should check the camera image on the multi-around monitor "Bird's eye-view". If necessary, calibrate the camera (Refer to Description).
Pre-removal and Post-installation Operation
Center console assembly Removal and Installation (Refer to Removal and Installation).
Removal Steps
1.Ground bolt
2.Multi-around monitor control unit
 
 
INSTALLATION SERVICE POINT
 
 
>>A<< MULTI-AROUND MONITOR CONTROL UNIT MOUNTING BOLT (GROUND BOLT) INSTALLATION
Check the head mark "E" and install the ground bolt.