When replacing the multi-around monitor control unit, always replace it with a new one. Multi-around monitor system does not operate properly in case of reuse of the multi-around monitor control unit from another vehicle.
When before writing the multi-around monitor control unit configuration, always writing the MAC key.
Perform the following operations when replacing multi-around monitor control unit. For details, refer to Work Procedure.
AFTER REPLACEMENT
When after replacing multi-around monitor control unit, the following items must be performed. Or not doing so, multi-around monitor system does not operate normally.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.