[Previous][Next]
REMOVAL AND INSTALLATION
 
 
Removal steps
1.Glove box and glove box damper connection
2.Glove box
3.Glove box cover
4.Glove box cushion
Instrument mask RH (Refer to Removal and Installation).
Instrument panel pad RH (Refer to Removal and Installation).
5.Glove box case assembly
6.Glove box damper
7.Glove box case
Instrument panel center cover assembly (Refer to Removal and Installation).
Instrument lower center panel (Refer to Removal and Installation).
8.Instrument lower panel center assembly
A/C switch assembly (Refer to A/C CONTROLLER ASSEMBLY REMOVAL AND INSTALLATION)
9.Instrument lower panel center
Required Special Tool:
  • MB990784: Ornament Remover
 
 
REMOVAL SERVICE POINTS
 
 
<<A>> GLOVE BOX CASE ASSEMBLY REMOVAL
Remove the clips shown in the figure using ornament remover (Special tool: MB990784).
 
 
 
<<B>> INSTRUMENT LOWER PANEL CENTER ASSEMBLY REMOVAL
Remove the clips shown in the figure using ornament remover (Special tool: MB990784).