REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
Console Finisher Assembly (Refer to
Removal and Installation
).
Removal steps
1.
Console finisher tray mat
2.
Instrument lower center panel
3.
Cigar lighter
4.
Power socket
5.
Wireless charger unit
6.
Wireless charger indicator
7.
USB charge port
Required Special Tool:
MB990784: Ornament Remover
REMOVAL SERVICE POINT
<<A>> INSTRUMENT LOWER CENTER PANEL REMOVAL
Remove the clips shown in the figure using ornament remover (Special tool: MB990784).