[Previous][Next]
Work Procedure
cautionThe system does not operate normally unless the front camera unit configuration and the camera aiming adjustment are performed. Always perform them.
1.FRONT CAMERA UNIT CONFIGURATION
Perform the front camera unit configuration with M.U.T.-III SE. Refer to Work Procedure.
: .
 
2.CAMERA AIMING ADJUSTMENT
Perform the camera aiming adjustment with M.U.T.-III SE. Refer to Work Procedure.
: .
 
3.PERFORM SELF-DIAGNOSIS
Perform the self-diagnosis of front camera unit with M.U.T.-III SE. Check if any DTC is detected.
Is any DTC detected?
Perform the trouble diagnosis for the detected DTC. Refer to DTC IndexDTC Index .
.
 
4.ACTION TEST
  1. Perform the following system action test.
  2. Check that the each system operates normally.
: WORK END