Removal and Installation
REMOVAL
caution
Never damage the front door panel.
1.
Remove front door finisher. Refer to
Removal and Installation
.
2.
Disconnect door mirror assembly harness connector
.
3.
Disconnect side camera harness connector
(with side camera).
4.
Remove front door sealing screen
. Refer to
Removal and Installation
.
5.
Remove harness clip
.
6.
Remove blind cap
.
7.
Remove door mirror assembly mounting bolts
.
8.
Disengage door mirror assembly fixing pawl, and then remove door mirror assembly.
: Pawl
INSTALLATION
Note the following item, and then install in the reverse order of removal.
caution
Perform side camera image calibration (with side camera). Refer to
Work Procedure
.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.
.)
(with side camera). .)
.)
.)
)
.)