10. Remove cowl top extension mounting bolts, and then remove cowl top extension.
11. Remove EPT seal after removing cowl top extension.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
caution
Clean the joint between the cowl top cover and the windshield glass, and then install them.
Replace the EPT seal on the back surface with new EPT seal when reusing the cowl top cover.
When installing cowl top cover , always engage perfectly the portion of cowl top cover with the windshield glass lower molding , so that the surface height difference between the cowl top cover and windshield glass becomes “0”.
Never wash the vehicle within 24 hours after installing so as to keep adhesive.
After installing, perform adjustment of front wiper arms. Refer to Adjustment.
![[Previous]](../../../buttons/fprev.png)
![[Next]](../../../buttons/fnext.png)
.)
)
and upper side of front fender panel with a shop cloth (A) to prevent damage.)
.)
of cowl top cover with the windshield glass lower molding )