[Previous][Next]
Removal and Installation
 
 
REMOVAL
 
 
1. Remove cowl top cover. Refer to Removal and Installation.
2. Disconnect front wiper motor harness connector .
3. Remove front wiper drive assembly mounting bolts , and then remove front wiper drive assembly.
 
 
INSTALLATION
Note the following item, and then install in the reverse order of removal.
caution
  • When installing, temporarily tighten all mounting bolts, and then tighten bolts to specified torque. Refer to Exploded View.
  • When front wiper drive assembly is replaced, before installing front wiper arm, operate front wipers, set front wiper motor to the auto stop position, and then install front wiper arms.